Analog Communication Interview Questions and Answers

Sep 15 • Question Paper • 132799 Views • 49 Comments on Analog Communication Interview Questions and Answers

Register Your Coaching

oureducation.in Register Your Coaching

register your self as teacher

oureducation.in register your self as teacher

Introduction

Analog Communication is a data transmitting technique in which information signal is transmitted in analog nature. This always utilizes continuous signals to transmit data which may obtained from audio, image, video etc. An Analog signal is a variable signal continuous in both time and amplitude. To produce modulated signal inside the transmitter in Analog Communication, analog signal modulates the high carrier frequency. Than this modulated signal is transmitted with the help of antenna. All AM, FM audio transmission and T.V. transmission are the most preferable examples of analog communication. Analog communication is very important topic for the students preparing for GATE Exam(Electronics) Following questions will help to learn the basics concepts of analog communication.

Refer GATE  Syllabus for Electronics and Communication to find out the related topics of Analog Communication.

ECE Interview Questions with Answers
On
Analog Communication

1. What is Sampling? What is Sampling Theorem?

Ans: Sampling is defined as the process in which an analog signals are converted into digital signals. It means that a continuous time signal is converted into a discrete time signal.

Analog Communication

Analog Communication notes

Sampling Theorem is defined as : ’The continuous time signal that can be represented in its samples and recovered back if the sampling frequency (fs) is greater than the maximum frequency of  the signal (fm) that is fs >2fm’.

2. Define PAM and write down its drawbacks?

Ans: Pulse Amplitude Modulation is the process by which the amplitude of the regularly spaced pulses varies according to the the amplitude of the modulating signal.

 The drawbacks are:

a. Since the amplitude of the pulses varies therefore the peak power of  the modulating s/g  is much greater.

b. The bandwidth required for transmitting is greater since the amplitude varies.

3. What is Modulation? What happens in over modulation? 

Ans: Modulation is defined as the process in which some characteristics of the signal called carrier is varied according to the modulating or baseband signal. For example – Amplitude Modulation, Phase Modulation, Frequency Modulation.

In case of over modulation, the modulation index is greater than one and envelope distortion occurs.

4. What do you mean by Nyquist rate?

Ans: In case of Nyquist rate, the sampling frequency is equal to the maximum frequency of the signal and therefore the successive cycles of the spectrum does not overlap.

5. What do you mean by FM and classify FM?

Ans: Frequency Modulation can be defined as the frequency of the carrier (wc) is varied acc. to the modulating signal about an unmodulated frequency.

FM are of 2 types:

a. Narrowband FM

b. Wideband FM

6. What is under sampling?

 Ans: Under sampling is also known as aliasing effect in which the the sampling frequency is less than the maximum frequency of the signal and therefore the successive cycles of the spectrum overlap.

7. State the advantages of  superheterodyning?

Ans: The advantages are:

a. High selectivity and sensitivity.

b. No change in Bandwidth that is bandwidth remains same all over the operating range.

c. High adjacent channel rejection.

8. What is multiplexing? Name the types of multiplexing?

Ans: Multiplexing is defined as the process in which a number of message signals are combined together to form composite signals so that they can be transmitted through the common channel.

The two types of multiplexing are:

a. Frequency Division Multiplexing: In this technique, fixed frequency bands are allotted to every user in the complete channel bandwidth. Such frequency is allotted to user on a continuous basis.

b. Time Division Multiplexing: When the pulse is present for the short time duration and  most of the time their is no signal present in-between them than this free space between the two pulses can occupied by the pulses from other channels. This is known as Time Division Multiplexing.

9. What is Amplitude Modulation?

Ans: Amplitude Modulation is defined as the process in which the instantaneous value of the amplitude of the carrier is varied according to the amplitude of the modulating or base band signal.

10. How can be aliasing be avoided?

 Ans: Aliasing can be avoided if:

a. Sampling frequency must be greater than the frequency of the modulating signal.

b. The frequency should be band limited to maximum frequency of the signal(fm) Htz.

c. If pre-alias filter is used.

For analog communication pdf, follow: Analog Communication Interview Questions

For more ECE Interview Questions you may like to visit

You may also like to visit Electronics Interview Questions to refine your search.

Your valuable thoughts/feedback are always appreciated for the further improvement.

Tell us Your Queries, Suggestions and Feedback

Your email address will not be published.

49 Responses to Analog Communication Interview Questions and Answers

  1. Anonymous says:
  2. dennis acheampong says:

    analog communication questions and anwers

  3. Anonymous says:
  4. 3rd sem says:
  5. 3rd sem says:
  6. 3rd sem says:
  7. 3rd sem says:
  8. 3rd sem says:
  9. Anonymous says:
  10. venkataramana says:

    communication systems interview questions

  11. venkataramana says:

    communication systems interview questions

  12. venkataramana says:
  13. madhu says:
  14. madhu says:
  15. Anonymous says:
  16. mounika says:

    about communication

  17. mounika says:

    about communication

  18. mounika says:

    about communication

  19. mounika says:

    about communication

  20. mounika says:

    about communication

  21. mounika says:

    about communication

  22. mounika says:

    about communication

  23. mounika says:

    about communication

  24. mounika says:

    about communication

  25. mounika says:

    about communication

  26. mounika says:

    about communication

  27. mounika says:

    about communication

  28. mounika says:

    about communication

  29. mounika says:

    about communication

  30. MAHALAKSHMI A says:
  31. Arani Ghosh says:

    interview questions on analog communication & digital communication

  32. siddhikh shannu says:

    I want to get well knowledge about the communication & elactronics,computers……

  33. Umesh Chaudhary says:

    Dear Sir/Madam,
    I am Umesh Chaudhary, completed my B.E in ECE in 2014 but i took 1 year for government job preparation.and i did non core job but it dint attract me. Not succeed yet.so i want private job in core companies.i like these two subjects: power electronic and telecommunication.and also my comminicatio skill is not so good.please assist me , how can i tackle interview in these subject.
    Thank you…7827575815

  34. Digital Communication using Scilab / MATLAB – electronics&communicationbasics says:

    […] Sampling is the process of converting analog signal into a discrete signal. A bandlimited signal can be reconstructed exactly if it is sampled […]

  35. sA says:

    PLEASE provide ANSWER solution for every single question which we want or which which we type

  36. Luxia No. 7 says:

    It’s amazing to pay a visit this web page and reading the views of all colleagues concerning
    this article, while I am also zealous of getting familiarity.

  37. archana says:

    difference n adv of coherent n synchronous detection
    difference b/w c n embedded c

  38. Palak Saha says:

    please, send some sample paper on analog and digital communication for interview

  39. Vikash Kumawat says:

    What are major project in communication for final year student?

  40. Josephine Lily says:

    interview questions that can be asked in analog and digital communication stream

  41. Sudipto Dutta says:

    what questions will ask in inter view session on analog communication??

  42. neeta handekar says:

    in what aspects ies exam preperation differ from gate & how can i prepare myself for ies exam while taking gate coaching?

  43. sindhura says:

    interview questions of analog and digital communication

  44. KALYAN BOSU says:

    ANY BASIC KNOWLEDGE ABOUT ANALOG COMMUNICATION STUDY MATIRIAL

  45. jothimani says:

    analog and digital questions and answer,vlsi,control system,microprocessor,digital electronics

  46. OIENDRILA SARKAR says:

    i want some beneficial tips for amcat electronics communication preparation

  47. konkala bhargav says:

    my stream engineering was ece my cgpa was very low and i want to crack gate how?

  48. NANCY says:

    what questions are supposed to be asked at the time of interview ia analog communication?

  49. Arpita Sardar says:

    I think it will be helpful for those people who want to take preperation for an interview that is mainly based on Analog Cmmunicaton…

« »