The Law of Parallelogram of Forces
The law of parallelogram of forces states that if two vectors acting on a particle at the same time be represented in magnitude and direction by the two adjacent sides of a parallelogram drawn from a point their resultant vector is represented in magnitude and direction by the diagonal of the parallelogram drawn from the same point .
Okay, got it what it wants to say. But, the main question here is how does it happen! Right?
So let us assume that the two vectors A and B, inclined at angle θ, be acting on a particle at the same time. Let they be represented in magnitude and direction by two adjacent sides OP and OS of parallelogram OPQS, drawn from a point O.
According to parallelogram law of vectors , their resultant vector will be represented by the diagonal of the parallelogram .
Magnitude and Direction of Resultant:
Draw a perpendicular QN to OP produced.
And let us assume that OP=A, OS= PQ= B, OQ=R and angle SOP= angle QPN = θ.
Now considering this if we proceed further , in the case of triangle law of vector addition , the magnitude and direction of resultant vector will be given by
R= sqrt of A^2 + B^2 + 2 AB cosθ
tan B = B sinθ/ A+B cosθ
Special cases :-
(1) When two vectors are acting in the same direction , then θ= 0 , cosθ=1 and sinθ= 0
R= sqrt of A^2 + B^2 + 2 AB
=sqrt of (A+B)^2 = A + B
tan Beta = B X 0/ A+B = 0
Beta = 0
Thus for two vectors acting in the same direction the magnitude of the resultant vector is equal to the sum of the magnitudes of two vectors and act along the direction of A and B.
(2) When two vectors are acting in opposite directions , then θ= 180 , cos θ= -1 and sinθ= 0
R= sqrt of A^2+ B^2+ 2 AB (-1)
= sqrt of (A-B) or (B-A)
tan beta = B X 0/ A+ B (-1)= 0
Beta = 0 or 180.
Thus for two vectors acting in opposite directions, the magnitude of the resultant vector is equal to the difference of the magnitudes of the two vectors and acts in the direction of bigger vector .
(3) When two vectors act at right angle to each other θ = 90 , sinθ = 1 and cosθ = 0
R= sqrt of A^2+B^2 + 2 AB (0)
= sqrt of A^2+B^2
tan beta = B(1)/A+B(0)= B/A
or, Beta = tan^-1 B/A
IMPORTANT NOTE :
1. It is to be noted that the magnitude of the resultant of two vectors is maximum , when the vectors act in the same direction and is minimum when they act in opposite directions.
2. It should be noted that while finding the resultant vector of two vectors by the parallelogram law of vector addition , the two vector A and B should be either act towards the point or away from the point .
Questions based upon parallelogram law of forces–
Q 1) Two forces 5 N and 20 N are acting at an angle of 120 degree between them . Find the resultant force in magnitude and direction.
Solution : Here A = 5 N
B = 20 N ; θ= 120 degree ; R= ?; beta =?
R= sqrt of A^2+ B^2+ 2 AB cosθ
= sqrt of 5^2 + 20^2+ 2 X 5 X 20 cos 120 degree
= sqrt of 325
= 18.03 N
tan beta = 5 sin 120 /20 + 5 cos 120
= 5 sqrt 3 / 2 /20 +5 X (-0.5)
= 0.2475 = tan 13 degree 54 min
hence, beta = 13 degree 54′
Q 2) .Two forces 10 N and 14 N are acting upon the a body . What can be the maximum and minimum resultant force on the body ?
Solution : Here, A= 10 N ; B= 14 N
R= sqrt of A^2 + B^2 + 2 AB cosθ
a) R will be maximum if cosθ= 1 , then
R= (A+B)=10+14=24 N in the direction of 14 N
b) R will be minimum if cosθ= -1 ,
then R= (A-B) or (B-A)
= 14- 10
=4 N in the direction of 14 N
Q 3). State the law of parallelogram with proper diagram.
Solution : It states that if two vectors acting on a particle at the same time be represented in magnitude and direction by the two adjacent sides of a parallelogram drawn from a point their resultant vector is represented in magnitude and direction by the diagonal of the parallelogram drawn from the same point.
Q 4) When vectors act as maximum and minimum?
Solution : It is to be noted that the magnitude of the resultant of two vectors is maximum , when the vectors act in the same direction and is minimum when they act in opposite directions.
Q 5) What we need to consider in this law of parallelogram of forces
Solution : It should be noted that while finding the resultant vector of two vectors by the parallelogram law of vector addition , the two vector A and B should be either act towards the point or away from the point.
You may also like to visit:
Verification of Law of Triangle of Forces and Lami’s Theorem
Please help us to improve by providing your feedback in the comments
Oureducation.in is the best source of your education
Tell us Your Queries, Suggestions and Feedback
85 Responses to The Law of Parallelogram of Forces
« Moment of Inertia of a flywheel by falling weight method Silicone Resine, Preparation of Silicone Reisn(High polymer) »
nothing
nothing
nothing
I am busy with an Exercise but i am not very familiar with the Parallelogram of forces.
In this exercise the There is one 25 degree angle 75 Newton and 65 newton,so I must get the resultant.
I need help with the formula of getting the Resultant.
I am busy with an Exercise but i am not very familiar with the Parallelogram of forces.
In this exercise the There is one 25 degree angle 75 Newton and 65 newton,so I must get the resultant.
I need help with the formula of getting the Resultant.
Research materials in mechanical engineering
Education as the only way to a better living
Engineering
Engineering
parallelogram law
derivation
Diploma
Diploma
B.Tech
University of engineering and technology
engineering notes
engineering notes
Diploma
Bsc
i am doing b.tech from cs branch
and i want help in engeneering math,physics,mechanics and let us c
Diploma
Show verification of parallelogram law of forces and lami’s theory
I want to know about structure
resolution of forces
Parallelogram law of forces
Is there B tech at NDA?
Is there B tech at NDA?
Engineer
Engineer
Question and solution.
Question and solution.
Parallelogram law of forces
toturial lessons on parallelogram of forces
Polytechnic
Bangalore institut of techanalogy.kr road vv puram
Emc
Emc
My daughter is doing her BSc.II in Physics.I want to get Ref.Books /solved problem/audio/video/ books written by Indian authors only.
By scale and drawing and formulae find the resultant forces with the help of parallelogram law of forces.
A. 5N and 12N at 90* to each other.
Enter your any educational query or doubt. structural mechanic’s
Enter your any educational query or doubt releated my eduction
why don’t we get sum vector as 750g if two forces 250g and 500g act at angle 45 by parallelogram law of vector addition?
applications of parallelogram law of vector addition in life
APPARATORS USE IN EXPERIMENTING THE LAW OF PARALLELOGRAME OF FORCES
I AM Not Understanding APlied MEchanics And Material Science And Mettalurgy(MSM) of Diploma GTU
The law of parallelogram is one of the basic concepts required to solve numericals and to understand the various other concepts….This article has provided each basic inputs which one needs to know about this law along with some related questions and answers prove to be beneficiary
really it makes understand of parallelogram law of forces, and we can also find out the resulatant of the forces with this law by simply applying pythogaras theorem to the parallelogram by dividing it to 2 triangle….
Law of parallelogram is the most important topic of Vector chapter in Physics.Here this article clearly explains this.
This post is informative for all first year engineering and +2 students as this is one of the most important topic of mechanics. go through the article it will going to beneficial for you..
this article is very helpful in solving numericals related to parallelogram law of forces.
this article consists of verification of parallelogram with proper questions and answers. The students may take help from this for their clearing their doubts.
This blog Focuses on the verification of law of forces and also it has clear description of the “LAW OF PARALLELOGRAM OF FORCES”. Informative and useful post !!!
Its a very good article specially the questions, these are very frequent asking and more important questions when anybody deals with law of parallelogram.
this article provides various concepts used to solve numericals