INTRODUCTION TO IEEE 802.15 WPAN AND BLUETOOTH
INTRODUCTION TO IEEE 802.15 WPAN AND BLUETOOTH
IEEE 802.15 WPAN:-
– It is the working group of institute of Electrical and Electronics Engineering.
– It stands for the committees that mainly indicates wireless personal area networks.
– There are seven task groups. They are:-
1) TASK GROUP 1: WPAN/BLUETOOTH:-
It gives the definition of physical layer and media access control specification so it
Can specify wireless connectivity with fixed portable and moving devices.
2) TASK GROUP 2: COEXISTENCE:-
– It was published in 2003 and then at that time this group went into hibernation.
– It shows the coexistence of WPAN with other wireless devices.
3) TASK GROUP 3: HIGH RATE WPAN:-
– It provides a higher speed UWBPHY enhancement amendment for the image and multimedia purposes.
– WPAN allows close physical spacing with all other microwave systems in the 802.15
Family of WPAN.
4) TASK GROUP 4: LOW RATE WPAN:-
-It deals with low data rate but long battery life and very low complexity.
– Many standardized and propietary networks depend on this network.
5) TASK GROUP 5: MESH NETWORKING:-
– It is composed of two parts:-
(i) HIGH RATE WPAN MESH
(ii) LOW RATE WPAN MESH
– It gives the architectural framework that enables WPAN device to promote stable and scalable mesh networking.
6) TASK GROUP 6: BODY AREA NETWORK:-
It was formed in November 2007 to highlight a low power and short range wireless
standard.
7) TASK GROUP 7: VISIBILITY OF LIGHT COMMUNICATION:-
It was formed in January 2009 and was charted to write standards for free space
optical communication with the help of visibility of light.
HOME RF:-
– It was developed in 1998 by HOME RF group of workers.
– It is a wireless networking specification for home devices.
– This group was banned in January 2003 after other wireless network became more accessible to home users.
– It is used to spread spectrum of certain frequency.
– Its node can travel within 50 meter range of wireless access point.
BLUETOOTH:-
– It is a wireless technology that helps to exchange data within a very short distance.
– A network of patents is required to implement the technology and become licensed for those qualifying devices.
INTERFERENCE BETWEEN BLUETOOTH AND IEEE 802.11
– INTERFERENCE means the distance between two devices when they operate at the same frequency and same time.
– Since IEEE 802.11 is located on the wall it is less likely interfered by the Bluetooth.
– Interference from Bluetooth device to the IEEE 802.11 device are not possible.
EXPECTED QUESTIONS WITH ANSWERS
1) WHAT IS IEEE 802.15 WPAN? EXPLAIN ALL ITS TASK GROUP.
Ans:- IEEE 802.15 WPAN:-
– It is the working group of institute of Electrical and Electronics Engineering.
– It stands for the committees that mainly indicates wireless personal area networks.
– There are seven task groups. They are:-
1) TASK GROUP 1: WPAN/BLUETOOTH:-
It gives the definition of physical layer and media access control specification so it
Can specify wireless connectivity with fixed portable and moving devices.
2) TASK GROUP 2: COEXISTENCE:-
– It was published in 2003 and then at that time this group went into hibernation.
– It shows the coexistence of WPAN with other wireless devices.
3) TASK GROUP 3: HIGH RATE WPAN:-
– It provides a higher speed UWBPHY enhancement amendment for the image and multimedia purposes.
– WPAN allows close physical spacing with all other microwave systems in the 802.15
Family of WPAN.
4) TASK GROUP 4: LOW RATE WPAN:-
-It deals with low data rate but long battery life and very low complexity.
– Many standardized and propietary networks depend on this network.
5) TASK GROUP 5: MESH NETWORKING:-
– It is composed of two parts:-
(i) HIGH RATE WPAN MESH
(ii) LOW RATE WPAN MESH
– It gives the architectural framework that enables WPAN device to promote stable and scalable mesh networking.
6) TASK GROUP 6: BODY AREA NETWORK:-
It was formed in November 2007 to highlight a low power and short range wireless
standard.
7) TASK GROUP 7: VISIBILITY OF LIGHT COMMUNICATION:-
It was formed in January 2009 and was charted to write standards for free space
optical communication with the help of visibility of light.
2) WHAT IS HOME RF?
Ans:- HOME RF:-
– It was developed in 1998 by HOME RF group of workers.
– It is a wireless networking specification for home devices.
– This group was banned in January 2003 after other wireless network became more accessible to home users.
– It is used to spread spectrum of certain frequency.
– Its node can travel within 50 metre range of wireless access point.
3) WHAT IS A BLUETOOTH?
Ans:- BLUETOOTH:-
– It is a wireless technology that helps to exchange data within a very short distance.
– A network of patents is required to implement the technology and become licensed for those qualifying devices.
4) WHAT DO YOU MEAN BY INTERFERENCE BETWEEN BLUETOOTH AND IEEE 802.11?
Ans:-
INTERFERENCE BETWEEN BLUETOOTH AND IEEE 802.11
– INTERFERENCE means the distance between two devices when they operate at the same frequency and same time.
– Since IEEE 802.11 is located on the wall it is less likely interfered by the Bluetooth.
– Interference from Bluetooth device to the IEEE 802.11 device are not possible.
Tell us Your Queries, Suggestions and Feedback
2 Responses to INTRODUCTION TO IEEE 802.15 WPAN AND BLUETOOTH
« Call Center and BPO interview for freshers or experienced DIGITAL IMAGE »
The post is bout the INTRODUCTION TO IEEE 802.15 WPAN AND BLUETOOTH in detail with its related types and how it works.This is very important concept and should be in knowledge of every individual..!!!