PLACEMENT CRITERIA FOR FORCE MOTORS LIMITED
Force Motors Limited is an Automobile company started in the year 1958 as Bajaj tempo. The company was founded by N.K.Firodia. Their business processes are designing and development of automotive components, aggregates & vehicles and manufacturing the same. They manufacture range of vehicles such as small light commercial vehicles, sports-utility vehicles, heavy commercial vehicles and agricultural tractors. The company manufactures the gear boxes, engines, chassis, axles and bodies of its own.
They have Manufacturing units at:
Their products are:
- Force gurkha
- Force one
- Trax gama
- Trax cruiser
- Trax toofan
- Trax ambulance
- Trump 40
- Travellers of different uses
- Trax kargo-king
- Trax delivery van
|Sales Executives||B.E with MBA||3 years|
|Service Engineers||BE, PDAE, Diploma Engineers||2 to 3 years|
|Sr. engineers / Asst. Managers||Diploma I B. E. (Mechanical / Automobile)||6 to 12 years|
|ENGINEERS||Graduate / Diploma Engineers||2 to 8 years|
|SR ENGINEERS ( R & D )||Graduate /Diploma Engineers||2 to 8 years|
|ENGINEERS/ SR. ENGINEERS||B. E. (Mechanical) / Diploma Holders||5 to 8 years|
|Engineers – R&D (Electrical & Electronics)||B.E graduate||3 to 5 years|
|SR. ENGINEERS – R & D (Electrical & Electronics)||Graduate Engineers||3 to 5 years|
|Engineers||Graduate Engineers||2 to 6 years|
|Engineers/Sr. Engineers – Vehicle Design & Body Design||Graduate Engineers||2 to 6 years|
|Sr. Engineers||Graduate Engineers||2 to 6 years|
Interview processes are:
- IQ / Intelligence Test
- Technical Test
- Personal Round
Questions in Technical Round:
1. What is the difference between two stroke engine and four stroke engine?
In two stroke engine, there will be one power stroke for every two rotations of the crank shaft. Hence fuel will be drawn to the suction area in compression stroke and burnt fuel is thrown out though exhaust.
In four stroke engine, there will be one power stroke for every four rotations of crank shaft. Here, suction, compression, power & exhaust strokes are separated.
2. What is the meaning of CC of engine?
CC is Cubic centimetre representing the total volume of an engine cylinder. The engine which has more CC can produce more power.
3. What is injector pressure in heavy vehicle?
Injector pressure in heavy vehicle is about 220 kg/cm square.
4. What is transverse weight shift due to drive torque?
It is the weight of the drive torque which is bolted to the car.
5. What is DLL HELL?
It is the windows register which cant supports the multiple version of COM Components.
Questions in Personal Round:
1. Why big tyre is used in rear of vehicle?
Usually tractors have large rear tyres. Due to this, the surface area of the tractor’s wheel increases in the ground by increasing the capacity of pulling.
2. What is the purpose of Content management system?
It allows large number of people to contribute and share the data
Helps in data storage and retrieval of data.
Improves the ease of report writing and communication between users.
Reduce repetitive duplicate input.
3. What is NEC?
NEC is National Electric Code.
4. How do a Supervisor work?
A supervisor must be a democratic leader by taking the views from the subordinates and taking decisions in favour of both company and employees.
Pithampur Industrial Area,
Pithampur, District – Dhar,
Madhya Pradesh 454 775.
Phone No: 91 7292 253004