The JK Cement was started in the year 1974. The cement manufacturing plant of JK Cements is commissioned in Nimbahera and Rajasthan. The capacity of the plant was 0.3 million tonnes. The company has six plants today. The Nimbahera plant has three units and total capacity of the plant is 4.5 million tonnes. The other plant has capacity of 0.7 million TPA which is located at Mangrol. The plant located in Gotan has a capacity of 0.5 million TPA and another plant has capacity of 3 million TPA which is located at Muddapur. The annual capacity of the company is 400,000 tonnes. Details of Placement Critera of JK Cement Ltd is described in the following section.
The company is placed as 2nd largest manufacturer of white cement and first white cement manufacturer in India. The white cement plant was started at Gotan in the year 1984. The company has a fully automated plant for manufacturing wall putty. The capacity of the plant is 3 lakh tonnes per annum. The first company to install capacitive power plant is the JK cements. The company installed a capacitive power plant of capacity of 100 MWs at Bamania and Rajasthan. The company have also installed a waste recovery power plant at Muddapur.
The manufacturing products are
- White cement
- Grey cement
- Wall putty
Career in Cement Industry:
SAP Services Competitor analysis
Manager (Land Acquisition)
Requires handling the work related to Manager (Land Acquisition)
Any graduation with typing short hand
Handling the telephone calls & mails and Keeping daily track of all documents
DGM / GM (Personnel & Administration)
DGM / Sr. Manager / Manager (Civil)
Plan and review engineering activity
Strong knowledge & Fundamentals of F&A functions is required
LAB Chemist / CCR Operator / Supervisory Staff
M.Sc / B.Sc / M.Com
Sr. Manager (Legal)
Any graduation with B.L/M.L
Liasioning and negotiation with Lawyers
General Manager (Materials)
Requires handling the work
Head E&I (GM / DGM Level)
1. What is the average density of soil?
ANS: Soil used for civil engineering purpose should have a density of about 100 to 110 pounds per cubic feet.
2. Which gives strength to the building?
ANS: Pillars in the building give strength.
3. Which is the least sticky gluee.
ANS: Elmer’s glue
4. What is a hazard?
ANS: A hazard is any material that causes harm to the management like chemicals, electricity, noise etc.
5. What is kn measurement?
ANS: Kn measurement is used to measure speed nautical miles per hour also called as knots.
1. When should one need to do Risk Assessment?
ANS: Risk Assessment has to be carried before doing any work as an employer or a self-employed person.
2. How to find the amount of water in a pipe by foot.
ANS: The formula to find the gallons of water in a pipe is 0.61*d, where d is the diameter of the pipe in inches.
3. What is the first stage of planning in construction?
ANS: Briefing and Inception is the first stage of planning in construction.
4. Which activity in an organization is not directly responsible for operations management?ANS: To know the exact products and services of customer satisfaction is not directly responsible for operations management.
5. What are the functions of a column in a building?
ANS: A column in a building is used to support the weight of the roof and the upper floors. Load bearing beams along with column can support a lot of weight.
Get Interview Questions and Answers for JK Cement LTD in pdf format.
4, Bahadur Shah Zafar Marg,
Phone No: 011 33001142 12.
- Placement Criteria for Castrol India Limited
- ITC Interview Questions with Company Details
- SAP Interview Questions and Answers for Freshers
Give your feedback for the further improvement of this post.