Questions on IC Engines with answers

Last Updated: Aug 27, 2013

Jan 13 • Notes • 59590 Views • 58 Comments on Questions on IC Engines with answers

An automobile engineer or a mechanical engineer is required to go through the depths of the IC engine portion as they might have to answer a numerous questions be it in the interview or in academics. So here is a set of some frequently asked questions on IC engines with answers

1.WHAT IS IC ENGINE?
ANS. The internal combustion engine converts chemical energy into useful mechanical energy by burning fuel. Chemical energy is released when the fuel-air mixture is ignited by the spark in the combustion chamber. The gas produced in this reaction rapidly expands forcing the piston down the cylinder on the power stroke. 
2. WHAT IS 2-STROKE IC ENGINE?
ANS. 

AN 2-STROKE engine is designed by DUGLAD CLERK in 1880, the suction,compression,expansion and exhaust takes place during 2-stroke of piston.Their is 1 stroke after every revolution of the crank shift.

Questions on IC engine

2-Stroke IC Engine

Animation of two-stroke engine in operation, with a tuned pipe exhaust.

  3. WHAT IS 4-STROKE ENGINE?

ANS. 

A 4-stroke engine is an internal combustion engine in which  the piston completes four separate strokes— intake, compression, power, and exhaust— during two separate revolutions of the engine’s crankshaft, and one single thermodynamic cycle.It uses natural gas,manufactured gas.
FIGURE OF 4-STROKE
4-Stroke IC Engine
4. WHAT IS THE DIFFERENCE BETWEEN 2-STROKE AND 4-STROKE IC ENGINE?
ANS.  Difference between these two IC engine is given below:
  1. 2-stroke engine fires 1 time in each revolution whereas a 4-stroke fires 1 time in 2 revolutions.
  2. 2-stroke is simpler and lighter, but less versatile.
  3. In place of valves in 4-stroke engines ,ports are present in 2-stroke engines,stroke has no valve, the piston act like a valve to control the flow of fuel..
  4. light duty engines are 2 stroke used commonly, for heavy duty 4 stroke are used.

5. NAME THE MAIN STEPS INVOLVE IN 4-STROKE IC ENGINE?

ANS.Following are the steps involved in this are:

The steps involved here are:

  1. Intake stroke: Air and vaporized fuel are drawn in.
  2. Compression stroke: Fuel vapor and air are compressed and ignited.
  3. Combustion stroke: Fuel combusts and piston is pushed downwards.
  4. Exhaust stroke: Exhaust is driven out. During the 1st, 2nd, and 4th stroke the piston is relying on power and the momentum generated by the other pistons.
Four Stroke Cycle

Four Stroke Cycle

Four-stroke cycle (or Otto cycle)
1. Intake
2. Compression
3. Power
4. Exhaust

6.WHAT ARE THE APPLICATIONS OF IC ENGINE?
ANS. Following are the ares in which IC engines are used :
  • automobiles:  such as helicopters, big barges and ships and jet crafts utilize excess power which is supplied in the form of gas turbines.
  • aircraft vehicles,
  • motorbikes,
  • boats and other  locomotives.
  • major power plants and similar naval applications,
  • Battery operated electric vehicles

7.WHAT ARE THE ADVANTAGES OF LUBRICATION IN IC ENGINE?

ANS  .Following are the advantages of lubrication in IC engine:

  • It reduces the wear and tear of the moving parts.
  • It damps down the vibration of the engine.
  • It cleans the moving parts.
  • It makes the piston gas tight.

8. NAME THE COMMON LAYOUT OF THE IC ENGINE?

ANS. Following are the common layouts of the IC engine:

  • Reciprocating:
  1. Two-stroke engine
  2. Four-stroke engine (Otto cycle)
  3. Six-stroke engine
  4. Diesel engine
  5. Atkinson cycle
  6. Miller cycle
  • Rotary:
  1. Wankel engine
  • Continuous combustion:

Gas turbine

  1. Jet engine

9. NAME THE FUEL USED BY IC ENGINES?

ANS. Following are the types of fuels used for IC engines:

  1. Petroleum:  Petroleum spirit ,Petroleum diesel,liquified petroleum gas,Compressed natural gas,Jet fuel ,Residual fuel.
  2. Coal: methanol ,Gasoline ,Diesel fuel.
  3. Biofuels and vegoils:  Peanut oil and other vegoils , Biobutano, biodiesel ,Dimethyl Ether, biogas,hydrogen

10.WHAT ARE THE MEASURES OF IC ENGINE PERFORMANCE?

ANS.   Engine types vary greatly in a number of different ways and following are it’s measures of performance:

  1. energy efficiency
  2. fuel/propellant consumption
  3. power-to-weight ratio
  4. thrust to weight ratio
  5. Torque curves (for shaft engines) thrust lapse (jet engines)
  6. Compression ratio for piston engines, overall pressure ratio for jet engines and gas turbines

We hope that set of questions on IC engine provided here have helped you in some way. Please give your valuable feedback regarding this post so that we can come up with more and more helpful posts like this.

Related Search:

Fuel and Combustion

Combustion and its related numericals

Internal Combustion Engine Fuels

About the Author:

I am Passionate Content Writer. I have worked for Many Educational Firms in the Past. I Have done Journalism in Print Media. I also have done MBA from MICA. I am fun Loving Person and Believes in Spreading the Knowledge among people. I belong to Amritsar, Punjab

Tell us Your Queries, Suggestions and Feedback

Your email address will not be published. Required fields are marked *

58 Responses to Questions on IC Engines with answers

  1. dessie mulualem says:
    at
    Reply
  2. robertson craies says:
    at

    internal cobustion engine driver

    Reply
  3. Manu Dixit says:
    at

    I am a mechanical enginner fresher .After 2 days i have an interview in everest industries limited so can i please get the important questions that are to be asked in that company.

    Reply
  4. Anonymous says:
    at
    Reply
  5. Rahul says:
    at

    BSC

    Reply
  6. Rahul says:
    at
    Reply
  7. Rahul says:
    at
    Reply
  8. Rahul says:
    at
    Reply
  9. amit says:
    at

    Enter your any educational query or doubtDiplomq

    Reply
  10. amit says:
    at

    Enter your any educational query or doubtDiplomq

    Reply
  11. Akshay Nighot says:
    at
    Reply
  12. Rahul Prajapati says:
    at

    12 Pass

    Reply
  13. Sumit Shukla says:
    at
    Reply
  14. Anonymous says:
    at
    Reply
  15. virender Kumar says:
    at

    Diesel engine technical questions

    Reply
  16. Obsinan Girma says:
    at

    Striling process cycle

    Reply
  17. Bhuban Debbarma says:
    at

    IC engines

    Reply
  18. Bhuban Debbarma says:
    at
    Reply
  19. Anonymous says:
    at
    Reply
  20. Avijit Sarkar says:
    at

    Automobile engineering 2nd year

    Reply
  21. Aftab ansari says:
    at

    B a

    Reply
  22. Anonymous says:
    at
    Reply
  23. Anonymous says:
    at
    Reply
  24. Johnson Jacob says:
    at

    Mendelian flaws in this law of independent assortment

    Reply
  25. Yayra says:
    at

    Engines

    Reply
« Older Comments
Newer Comments »

« »