Analog Communication Interview Questions and Answers

Last Updated: Sep 20, 2018

Sep 15 • Question Paper • 135859 Views • 49 Comments on Analog Communication Interview Questions and Answers

Introduction

Analog Communication is a data transmitting technique in which information signal is transmitted in analog nature. This always utilizes continuous signals to transmit data which may obtained from audio, image, video etc. An Analog signal is a variable signal continuous in both time and amplitude. To produce modulated signal inside the transmitter in Analog Communication, analog signal modulates the high carrier frequency. Than this modulated signal is transmitted with the help of antenna. All AM, FM audio transmission and T.V. transmission are the most preferable examples of analog communication. Analog communication is very important topic for the students preparing for GATE Exam(Electronics) Following questions will help to learn the basics concepts of analog communication.

Refer GATE  Syllabus for Electronics and Communication to find out the related topics of Analog Communication.

ECE Interview Questions with Answers
On
Analog Communication

1. What is Sampling? What is Sampling Theorem?

Ans: Sampling is defined as the process in which an analog signals are converted into digital signals. It means that a continuous time signal is converted into a discrete time signal.

Sampling Theorem is defined as : ’The continuous time signal that can be represented in its samples and recovered back if the sampling frequency (fs) is greater than the maximum frequency of  the signal (fm) that is fs >2fm’.

2. Define PAM and write down its drawbacks?

Ans: Pulse Amplitude Modulation is the process by which the amplitude of the regularly spaced pulses varies according to the the amplitude of the modulating signal.

 The drawbacks are:

a. Since the amplitude of the pulses varies therefore the peak power of  the modulating s/g  is much greater.

b. The bandwidth required for transmitting is greater since the amplitude varies.

3. What is Modulation? What happens in over modulation? 

Ans: Modulation is defined as the process in which some characteristics of the signal called carrier is varied according to the modulating or baseband signal. For example – Amplitude Modulation, Phase Modulation, Frequency Modulation.

In case of over modulation, the modulation index is greater than one and envelope distortion occurs.

4. What do you mean by Nyquist rate?

Ans: In case of Nyquist rate, the sampling frequency is equal to the maximum frequency of the signal and therefore the successive cycles of the spectrum does not overlap.

5. What do you mean by FM and classify FM?

Ans: Frequency Modulation can be defined as the frequency of the carrier (wc) is varied acc. to the modulating signal about an unmodulated frequency.

FM are of 2 types:

a. Narrowband FM

b. Wideband FM

6. What is under sampling?

 Ans: Under sampling is also known as aliasing effect in which the the sampling frequency is less than the maximum frequency of the signal and therefore the successive cycles of the spectrum overlap.

7. State the advantages of  superheterodyning?

Ans: The advantages are:

a. High selectivity and sensitivity.

b. No change in Bandwidth that is bandwidth remains same all over the operating range.

c. High adjacent channel rejection.

8. What is multiplexing? Name the types of multiplexing?

Ans: Multiplexing is defined as the process in which a number of message signals are combined together to form composite signals so that they can be transmitted through the common channel.

The two types of multiplexing are:

a. Frequency Division Multiplexing: In this technique, fixed frequency bands are allotted to every user in the complete channel bandwidth. Such frequency is allotted to user on a continuous basis.

b. Time Division Multiplexing: When the pulse is present for the short time duration and  most of the time their is no signal present in-between them than this free space between the two pulses can occupied by the pulses from other channels. This is known as Time Division Multiplexing.

9. What is Amplitude Modulation?

Ans: Amplitude Modulation is defined as the process in which the instantaneous value of the amplitude of the carrier is varied according to the amplitude of the modulating or base band signal.

10. How can be aliasing be avoided?

 Ans: Aliasing can be avoided if:

a. Sampling frequency must be greater than the frequency of the modulating signal.

b. The frequency should be band limited to maximum frequency of the signal(fm) Htz.

c. If pre-alias filter is used.

For analog communication pdf, follow: Analog Communication Interview Questions

For more ECE Interview Questions you may like to visit

• Embedded Systems based Questions and Answers
• Questions on Electromagnetic Induction with answers
• Interview & Viva questions and answers on Digital Electronics

You may also like to visit Electronics Interview Questions to refine your search.

Your valuable thoughts/feedback are always appreciated for the further improvement.

analog communication notesanalog communication pdfece interview questionsece interview questions with answerselectronics interview questions

« GS Crafters IAS Academy Kingsway Camp Delhi C++ Interview Questions and Answers with PDF »