JK Cement Recruitment Details with Interview Questions

Last Updated: Sep 28, 2013

May 28 • General • 53736 Views • 176 Comments on JK Cement Recruitment Details with Interview Questions

PLACEMENT CRITERIA FOR JK CEMENTS LIMITED

Company’s Profile:

The JK Cement was started in the year 1974.  The cement manufacturing plant of JK Cements is commissioned in Nimbahera and Rajasthan.  The capacity of the plant was 0.3 million tonnes.  The company has six plants today.  The Nimbahera plant has three units and total capacity of the plant is 4.5 million tonnes.  The other plant has capacity of 0.7 million TPA which is located at Mangrol.  The plant located in Gotan has a capacity of 0.5 million TPA and another plant has capacity of 3 million TPA which is located at Muddapur.  The annual capacity of the company is 400,000 tonnes.  Details of Placement Critera of JK Cement Ltd is described in the following section.

Placement criteria for JK Cements Limited

JK Cement Recruitment Details

The company is placed as 2nd largest manufacturer of white cement and first white cement manufacturer in India.  The white cement plant was started at Gotan in the year 1984.  The company has a fully automated plant for manufacturing wall putty.  The capacity of the plant is 3 lakh tonnes per annum. The first company to install capacitive power plant is the JK cements.  The company installed a capacitive power plant of capacity of 100 MWs at Bamania and Rajasthan. The company have also installed a waste recovery power plant at Muddapur.

The manufacturing products are

  1. White cement
  2. Grey cement
  3. Wall putty

Career in Cement Industry:

Job title

Eligibility

Experience

Description

Manager-marketing

B.E/B.Tech

SAP Services Competitor analysis

Manager (Land Acquisition)

Retired STML

1-4 years

Requires handling the work related to Manager (Land Acquisition)

Executive Secretary

Any graduation with typing short hand

5-10 years

Handling the telephone calls & mails and Keeping daily track of all documents

GM Materials

B.E/B.Tech/ M.Tech

15-20 years

Technically responsible

DGM / GM (Personnel &   Administration)

MSW/MBA/CA

15-20 years

Technically responsible

DGM / Sr. Manager / Manager (Civil)

B.E-civil

8-15 years

Plan and review engineering activity

GM-Corporate Accounting

CA

10-20 years

Strong knowledge &       Fundamentals of F&A functions is required

LAB Chemist / CCR Operator / Supervisory Staff

M.Sc / B.Sc / M.Com

3-8 years

Sr. Manager (Legal)

Any graduation with B.L/M.L

10-15 years

Liasioning and negotiation with Lawyers

General Manager (Materials)

B.E/B.Tech/ M.Tech

10-15 years

Requires handling the work

Head E&I (GM / DGM Level)

B.E/B.Tech /M.Tech

15-20 years

Draught man

ITI

3-5 years

Interview Questions and Answers

1.  What is the average density of soil?
ANS: Soil used for civil engineering purpose should have a density of about 100 to 110 pounds per cubic feet.

2.  Which gives strength to the building?
ANS: Pillars in the building give strength.

3.  Which is the least sticky gluee.
ANS: Elmer’s glue

4.  What is a hazard?
ANS: A hazard is any material that causes harm to the management like chemicals, electricity, noise etc.

5.  What is kn measurement?
ANS: Kn measurement is used to measure speed nautical miles per hour also called as knots. 

Direct Round Questions:

1.  When should one need to do Risk Assessment?
ANS: Risk Assessment has to be carried before doing any work as an employer or a self-employed person.

2.  How to find the amount of water in a pipe by foot.
ANS: The formula to find the gallons of water in a pipe is 0.61*d, where d is the diameter of the pipe in inches.

3.  What is the first stage of planning in construction?
ANS: Briefing and Inception is the first stage of planning in construction.

4.  Which activity in an organization is not directly responsible for operations management?ANS: To know the exact products and services of customer satisfaction is not directly responsible for operations management.

5.  What are the functions of a column in a building?
ANS: A column in a building is used to support the weight of the roof and the upper floors.  Load bearing beams along with column can support a lot of weight.

Get Interview Questions and Answers for JK Cement LTD in pdf format.

Contact Us:

Head Office:
Nehru House,
4, Bahadur Shah Zafar Marg,
New Delhi.
Phone No: 011 33001142 12.
Website: www.jklakshmi.com

Related links:

Give your feedback for the further improvement of this post.

Tell us Your Queries, Suggestions and Feedback

Your email address will not be published. Required fields are marked *

176 Responses to JK Cement Recruitment Details with Interview Questions

  1. sharwan Kumar visu says:

    Two years diploma in electronic
    B A MDS university pgdca computer diploma in jnu Jaipur rajasthan

  2. Sandeep kumar yadav says:

    Diploma in chemical

  3. rajendra kumar says:

    Hello sir I am Rajendra Kumar from Bhubaneswar i am btech mechanical engineer at present working in suratgarh thermal power station as a site engineer.If any opportunity for me to work for your prestigious organization kindly reply.

  4. nitesh pandey says:

    Diploma in Accountancy

  5. Kalu Sharma says:

    Mca final year

  6. Prabhat Yadav says:

    I am currently working in EATON FLUID POWER LTD from 11 july 2016 to till date as a DIPLOMA TRAINEE in mechanical department pls contact me for the latest vacancy

  7. Rajat sharma says:

    Diploma in civil branch . pass out 2013 year . currently work in wonder cement ltd. 3 year experiance in cement industry.

  8. Kailash Jat says:

    Dear sir

    मेरा नाम कैलाश जाट है । मे BSc gradute हू । BSc , 2016 मे pass out की हे। मेरे पापा खेती करते है। मेनै 10th and 12th chittorgarh से की हे ।
    10th = 77.83%

    12th = 68.40%

    Bsc = 68.32%

    Please job available हो तो inform me
    Mob. 9828014228
    Regards
    KAILASH JAT

  9. Satish patle says:

    I have completed diploma in chemical engineering from SATI college vidisha

  10. bharat dhaker says:

    Diploma in electrical
    2 year experience in miraj pipes & fitting Pvt. Ltd. Udaipur

  11. Avinash kn says:

    Diploma in Mech.Engg with 2.3 yrs experience as a Machine shop supervisor

  12. Dinesh Prajapat says:

    I am ITI in electrician pass out and 69% and apprentice kar ni he please help

  13. Archit Sinha says:

    Please context me and clear my doubt according to b.tech and mba

  14. kuldeep lakhiwal says:

    i have b.tech in mechanical engg. but having backlog can i get job in j.k. cement plant.

  15. lokesh kumar says:

    DIPLOM MECHANICAL GOVT COLLAGE CHITTROGAH PASS OUT 2015

  16. Hemendra Singh says:

    Hello sir ,
    I am a diploma holder in electrical and I want to do apprentice course . Give me a right way

  17. Neeraj Maheshwari says:

    B.com,  Work On MS Office, English Typing
     Can Good Knowledge of Basic, Tally Accounting and Networking,Excel

  18. deepak kumar khatik says:

    Poly. Diploma electronics engineering govt. Poly. College chittorgarh with 56.24%

  19. yash paul says:

    i applied for ajob in jammu/ baribrahmna areA. but dsnt get any call letter .

  20. Rohit Sharma says:

    BBA AND 3YEAR JOB EXPERIENCE IN ACCOUNTS OPERATION

  21. ravi prakash dahayat says:

    Diploma in cement technology engineering govt. polytechnic college Satna m.p. present in amrit cement meghalaya one year experience

  22. Gavhane Pradip Rajaram says:

    I have completed diploma in civil engineering.. …working experience in Ambuja cement Ltd Aurangabad

  23. Pradip Rajaram Gavhane says:

    I have completed diploma in civil engineering.. ..working experience in Ambuja cement Ltd

  24. rajkumar tiwari says:

    diploma [mech]and one year expreance in jk cement plant nimbahera.

  25. PRASANTA KUMAR DASH says:

    I HAVE AN EXPERIENCE OF 25 YEARS IN MAINTENANCE OF VRM UNIT AND PROCUREMENT DIVISION.

« »